73 thoughts on “Walkthrough: Create custom SharePoint 2010 list form for deployment in a Visual Studio 2010 project – PART 2”

1. hi,

   When I run the list definition 2 example from the codeplex project, the new form does not show a ‘Body’ control or an ‘Expires’ control – just the labels? Also, I would like to see the deom expanded to show some controls added that are not FormField controls – e.g. NoteField, DateTimeField, LookupField etc. Any chance of doing this do you think?

   Cheers,

   Nigel

   Reply ↓

   • I followed the above approach and build my custom list , i am stuck at saveing the item. I have identified that when
     is like this in
     custom list form aspx page, then i am seein the page with extra column is coming along with my custom list title form field. Please help me

     Reply ↓

2. Hi, very nice Post!!! but i have this error when i’am trying to attach a file:

   This form was customized and attachments will not work correctly because the HTML ‘span’ element does not contain an ‘id’ attribute named ‘part1.’

   Any idea on how i can resolve this?

   Thanks and sorry for my bad english!

   Christian

   Reply ↓

   • oups… sorry, stupid question… now it’s working…

     Reply ↓

3. Very nice find.. thanks.

   Reply ↓

4. It’s perfect!!! Thanks a lot!
   I could make this for New and Edit form. But this can be done for Display form.
   I followed all the steps, but couldn’t get it works.

   Please help in advice!

   Ands fenomen

   Reply ↓

   • Just some ramark for my post…
     I can’t make this for Display Form

     Reply ↓

   • Hi Ands,

     it should work the same way as for New and Edit form. Did you set the “ControlMode” in the ASPX file to “Display”?

     Ingo

     Reply ↓

5. I tried adding a control like

   to the code behind, but I can’t get a reference to it in the code? Or ANY control for that matter?
   Are the form entry controls inside a different scope in this form?

   Reply ↓

   • please post your code. It’s difficult for me to answer you question. I’ve done creating Display forms before successfully. there must be a bug in your code 😉

     Ingo

     Reply ↓

     • <%@ Assembly Name=”$SharePoint.Project.AssemblyFullName$” %>
       <%@ Page Language=”C#” AutoEventWireup=”true” CodeBehind=”LeaveRequestAddForm.aspx.cs” Inherits=”ESCG.Sharepoint.Layouts.ESCG.Sharepoint.LeaveRequestAddForm” MasterPageFile=”~masterurl/default.master” %>
       <%@ Register Tagprefix=”SharePoint” Namespace=”Microsoft.SharePoint.WebControls” Assembly=”Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c” %>
       <%@ Register Tagprefix=”Utilities” Namespace=”Microsoft.SharePoint.Utilities” Assembly=”Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c” %>
       <%@ Import Namespace=”Microsoft.SharePoint” %>
       <%@ Assembly Name=”Microsoft.Web.CommandUI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c” %>
       <%@ Register Tagprefix=”WebPartPages” Namespace=”Microsoft.SharePoint.WebPartPages” Assembly=”Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c” %>
       …
       <tr>
       <td width=”190px” valign=”top” class=”ms-formlabel”>
       <h3 class=”ms-standardheader”>
       <nobr>Employee</nobr>
       </h3>
       </td>
       <td width=”400px” valign=”top” class=”ms-formbody”>
       <SharePoint:EntityPicker runat=”server” ID=”employeeCtrl” ControlMode=”New” />
       <SharePoint:FieldDescription runat=”server” ID=”employeeDescription” FieldName=”EmployeeField” ControlMode=”New” />
       </td>
       </tr>

       Reply ↓

       • I just want to get a reference to employeeCtrl in the codebehind so I can set the data from a BDC. Even FindControl doesn’t seem to work. The CodeBehind and Inherits attributes are correct.

         Reply ↓

         • To get a reference, you have to define the Control in the class definition of the code behind class file as a class member. Without such a definition the control is not available in your code. – To see what I mean just add a new Application page and create a control in the ASPX file. Than open the Designer generated file that defines the “partial class”. There you should find the code behind definition of the control you added in the ASPX file. In the same way you create a class member definition for your EntityPicker control. – This control does not have a “ControlMode” property. Have a look at MSDN: http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.webcontrols.entitypicker_members.aspx

           Ingo

     • Stupid me. Yea. Fixed it. Thanks.
       OK. Hum, maybe I’m beating down the wrong path. One of the fields in my list is the value from a BDC source (which is a list of entities). I was going to populate the EntityPicker from the external list. I know I can do all this in Designer, but I want to do it from VS 2010.

       Reply ↓

       • Hi!

         Thats not easy, I think 😉 I’ll see how to do that (BCD field). But this will take a while… I’m (glad to be) in projects at the moment 🙂

         Ingo

         Reply ↓

         • Opps. Actually, I think I want to do a custom PickerDialog. EntityPicker pops-up a dialog of all the entities in the site.

6. Do you know how I could use a radio button list to populate a text field, such as Title? I have been trying this in Designer for quite some time with no success. I basically deleted the SharePoint:FormField and replaced it with all kinds of different attempts, such as html radio buttons, asp radio buttons, asp radio button list, SP data view radio button lists, and I’ve tried messing around with the SharePoint:RadioButtonChoiceField, but I keep running in to some kind of problem. I want three radio buttons and whichever is selected, the value populates the Title field. Thanks in advance!

   Reply ↓

   • Hi Panda!

     I would do this as like this:
     1. Customize the List Form in SharePoint Designer 2010 in Advanced Mode.
     2. Use ths jQuery library (link the JavaScript library in the List Form ASPX page). jQuery
     3. Encapsulate the “Title” FormField tag with

     and give the DIV an ID, e.g. “MyTitleDIV”
     4. Set the “Title” FormField to be hidden by using CSS inline style “display:hidden”
     5. Create the radio buttons below the “Title” FormField
     6. Assign a “OnChange” event to the radio buttons
     7. In the “OnChange” event handler set the FormField’s value. The FormField is rendered as tag I think. Use jQuery to find the INPUT control, e.g. $("#MyTitleDIV).find("input:first").val( xyz ); where “xyz” is the value you would like to set for the “Title” field.

     That should work. – I’ve done such modifications using this method.

     I hope this helps! – Please let me know how you’ve done it.

     Kind regards
     Ingo

     Reply ↓

     • IKarstein,

       I basically did what you said, but regular javascript – no jQuery. Thanks! Now I will be trying out this method of creating the list form in VS. If it works, Super helpful post!!!

       Reply ↓

     • Is there a way to create a project to customize a list form or set of list forms for a list that already exists? It looks like this method described in part 1 shows how to create a new list and then customize the list form, but I need to customize a current list’s form.

       Reply ↓

       • Hi Panda, did you ever find out about customizing an existing list form?

         Regards
         Justin

         Reply ↓

7. Hello. Please I have one special question.
   I have created also Edit Form like you wrote in this article and also I have changed ControlMode to Edit. Is possible to bind data to this custom edit form?
   For example my row in edit2.aspx look like:

   But when I open this form in sharepoint(I want to edit some row) There is’t my value but this text: “Title field value”.Hmm….
   Is possible to bind data to this form without C# code?

   PS: When I created custom form in sharepoint designer everything was working and the actual data was there…

   Reply ↓

   • I am very sorry but I try everything and I don’t understand this. In my edit2.aspx form I have also savebutton:

     SharePoint:SaveButton runat=”server” ControlMode=”Edit” ID=”savebutton”

     ControlMode is set to EDIT…..But when I open some content for editing and press Save button…It didn’t update the content but it add another row to SharePoint list.
     What I need to change in may new edit2.aspx created from base EditForm.aspx so it will works like standard EditForm.
     The data will be filled and the Save will update the row. Do I need to add to edit2.aspx something special for this…. some type of binding webpart?

     Thank you very much for help.

     Reply ↓

   • Hello. I have created everything again step by step and right now is everything working also for edit form. Sorry for my previous post. You can simply remove it because right now binding works and also update works perfect. Again and Again Thank you for your blog and sorry.

     Reply ↓

     • Hi Enti!

       it’s great! you solved it on your own! – I’ve approved all of your comments just to show your problem and *your* solution. It’s ok, isn’t it?

       Kind regards
       Ingo

       Reply ↓

8. Hi

   I have a requirement to display a field on the table dependant on the value of on of the fields. However I am struggling on how to assign the field valve to a variable.
   Is this possible?

   My sample code is below:

   This works at present, but I want to change the int d =2: line to that it accepts a field as the variable.
   I had tried int d =; but it will not accept it.

   Can you help?
   Cheers,
   Phil

   Reply ↓

   • My code…not sure where it went before.

     <% int d = 2;
     if (d == ())
     { %>

     Reply ↓

     • third time lucky,..

       <% int d = 2;
       if (d == ())
       { %>

       Reply ↓

       • Phil,

         I’m not sure that I understand your need. Sorry. You want to assign the value of a SharePoint List Item Field to a variable at a ASPX page?? – Some questions: A) What kind of page do you have (list view page, application page, …)? B) What kind of SharePoint List Item do you use (which content type)? C) Whats the data type of the field?

         Maybe you need to use SPContext.Current.Item[] where you replace with the internal field name 😉 E.g. SPContext.Current.Item[“Title”]. This lets you access the value of the field “Title” of the current List Item. But SPContext does not work in every context 😉

         I’d like to help you. But thats all what I can do for you at the moment.

         Kind regards
         ingo

         Reply ↓

         • Hi,
           I’ll try to explain myself better.
           I have created a custom list which amogst other fields holds a ‘statusID’. For this list I have created a custom form, using your guide 😉
           On the add new item form, the status id is a required field (its a lookup from another field actually).
           Now my issue. When I click on my custom view form I would like row on my table to have
           Status: then based on the StatusID and image (30 green, something similar to KPI indicators).
           Therefore I need to pass the StatusID field into a variable then perform some logic so that dependant on the value I can display the correct image.
           Does that make more sense?
           The page I am working on is the ‘custom display form aspx page.
           The field is held within a list content type.
           The field is a type number.

           Hope this makes my problem clearer.

           Any help would be greatly appreciated.
           Phil

         • This might help..
           <asp:Image ID="imgMyImage" runat="server" ImageUrl='’ />

           Found this online

9. Hello. With your article help I have generated also for EXTERNAL LIST these forms…Almost Evrything is working but I have one problem…..
   If I define UseLegacyForm=”TRUE” this external list ignore this and still will generate for my forms in WebPartZone fields…If I set up for WebPartZone visibily=”false” everythig is OK and I can generate my own fields but ribbon menu is only readonly….Evrything was working with my custom list but in external list I have these problems….I don’t know why external list still ignore UseLegacyForm=”TRUE” and still generate fields….Hmm….Can you please help me with this…Thank You

   Reply ↓

10. Hi,

    Thanks a lot for this nice post.

    But… For the WebPartZone HTML tag, wouldn’t it be “visible=false” instead of “visible=true” ?

    Regards,

    Jerome.

    Reply ↓

11. This is working really well for me, thanks!
    But one issue that’s driving me crazy…. after I set UseLegacyForm=”TRUE” I find the ribbon controls on the ‘Display’ mode are showing all sorts of irrelevant icons: Check In/Check Out (this isn’t enabled on the list), Approve/Reject, Manage Copies, Workflows, Claim Release, Delete Item Version, Restore Item Version, Health Run Now, Reanalyze Now, Repair Automatically, and Activate, Deactive and Upgrade!
    How can I get it to just display the standard (Edit Item, Version History, Manage Permissions, Delete Item, Alert Me)?

    Reply ↓

    • Couldn’t find a simple way to achieve this so ended up individually trimming all the extra icons from the ribbon. This is working well. I’ll post it here for anyone else who notices the same thing:

      On the Page_Load of your custom form add the folowing:

      SPRibbon rib = SPRibbon.GetCurrent(this);
      if (rib != null)
      {
      rib.TrimById(“Ribbon.ListForm.Display.Manage.EditSeries”);
      rib.TrimById(“Ribbon.ListForm.Display.Manage.CheckIn”);
      rib.TrimById(“Ribbon.ListForm.Display.Manage.CheckOut”);
      rib.TrimById(“Ribbon.ListForm.Display.Manage.ApproveReject”);
      rib.TrimById(“Ribbon.ListForm.Display.Manage.ManageCopies”);
      rib.TrimById(“Ribbon.ListForm.Display.Manage.Workflows”);
      rib.TrimById(“Ribbon.ListForm.Display.Manage.EnterFolder”);
      rib.TrimById(“Ribbon.ListForm.Display.Manage.ClaimReleaseTask”);
      rib.TrimById(“Ribbon.ListForm.Display.Manage.DistributionListsApproval”);
      rib.TrimById(“Ribbon.ListForm.Display.Manage.DeleteItemVersion”);
      rib.TrimById(“Ribbon.ListForm.Display.Manage.RestoreItemVersion”);

      rib.TrimById(“Ribbon.ListForm.Display.HealthActions”);
      rib.TrimById(“Ribbon.ListForm.Display.Solution”);
      }

      Reply ↓

12. Thanks ikarstein for sharing knowledge and this is very useful post.
    I have created Custom form for New and Edit item for all my lists in SPD 2010 now i want to deploy them through VS 2010 and i found your post but i have couple of Question.
    1.Do i have to remove __designer:bind =”” from Code generated By SPD ?
    2.In all these custom forms i have one field which is lookup to Department list so what i have done is change this field to TextBox from FormField and then bind this TextBox to Querystring which is DepartmentID and then hide this field so user dont have to select DepartmentID.Here is code for it

    Cost Center

    Do i need to copy and paste same code or i need to do this code behind ?

    Please advise

    Thanks
    Ronak

    Reply ↓

13. I am working on doing this for a custom list instance in VS 2010. I have the list instance pointing to a CustomSchema and therein I have the Forms element pointing to my custom form. It works well and I thank you for this. However, the attachments do not work: “Failed to get value of the “Attachments” column from the “Attachments” field type control. See details in log. Exception message: Guid should contain 32 digits with 4 dashes (xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).. “. I did include the span with the part1 id. Any help would be greatly appreciated.

    Reply ↓

    • Nevermind. I changed the schemal for it’s custom “item” content type node to have instead of templates and added the fieldRefs to the content type node and it seems to be working now. Sharepoint is so very convoluted (and I’ve been doing it for years).

      Reply ↓

14. Hi, thank you for you Post. It’s great!

    I have a quesitons

    How can I validate data in my dropdowns controls on saveButton click event?
    Looks like I don’t have access to click event.

    I have requirements to validate one field based on value of other.

    For example When Name=”TEST1″ I want field Code be mandatory in all other cases empty value is allowed.
    Can you please suggest best way to implement it?

    Name

    Name

    Reply ↓

15. Hi,
    I have tried this solution and now im having a problem with master pages. When i change V4.MasterPage in sharepoint designer it gives error when i open my new custom form for my list. The error im obtaining is that AutoEventWireUp cannot be true. But if i delete this settings i get other errors. Have anyone come to errors like these? I cant change nothing in the V4.Master.

    Reply ↓

16. Hi,
    Is there a way of changing the default width of the modal dialog on opening?
    I would like to add some custom buttons to the form but need it wider to place all the buttons.
    Cheers,

    Reply ↓

    • Hi! – You mean a JavaScript SharePoint dialog?

      Try this:

      function adderWithScriptDlg() {
      var options = {
      url: SP.Utilities.Utility.getLayoutsPageUrl(‘your_layouts_page.aspx’),
      title: “My Dialog”,
      width: 400,
      height: 300,
      dialogReturnValueCallback:
      Function.createDelegate(null, function (dialogResult, returnValue) {
      //executed in case of success
      })
      }
      SP.UI.ModalDialog.showModalDialog(options);
      }

      Ingo

      Reply ↓

17. Great post. But i have question, how can i set an application page which contains its fields & some codebehind as newform2.aspx?

    Reply ↓

18. Is there any way I could override the save button? What I wish to achieve is when the user submit the form I want it to prompt the form is submitted and stay on the same page instead of redirecting it back to the list library. My idea was to hide the user from accessing the list directly.

    Reply ↓

    • Hi!

      you have to implement your own save button.

      but you could implement a site page or application page for your requirements. Than you have to implement your own save mechanism. But in way you can prevent the user from accessing the list directly. You could protect the list by using special permissions and save data to the list by using “RunWithElevatedPriveledges”.

      Ingo

      Reply ↓

19. Pingback: Create custom SharePoint 2010 list form for deployment in a Visual Studio 2010 « Anatoly Saplev

20. My custom newform pages are loading slowly. Any ideas?

    Reply ↓

    • sybil-

      without reviewing the code I cannot say anything about that. sorry.

      ingo

      Reply ↓

21. Thanks a lot for great post.

    I have a question, when I follow your instruction for New DocumentSet Application Page, I got following error on Save Button Click Event.
    Could not find FileField control.

    do you know what can be the issue.

    Reply ↓

22. After UseLegacyForm=”True”, the controls are still there.
    What’s wrong?

    Reply ↓

    • Probably you already found the answer but True should be written in capitals…

      Reply ↓

23. you might want to modify the post, it is important to use UseLegacyForm=”TRUE”, the “True” must be in all caps or else the old form stays present and if you try to hide it, using visible=”false”, the Save Button won’t work because it tries to post the old form.

    Reply ↓

24. I’ve found http://spform.com. Forms designer for sharepoint online provides UI-interface to customize forms. It creates custom form pages automatically. You can change then its markup with sp designer

    Reply ↓

    • looks cool! thanks!

      Reply ↓

25. Great Post. It worked for me. Thanks a lot. I would like to have validation of the controls on click of the Save button, I tried using javascript, it didnt work for me. Can you suggest me any approach, if you have, to perform validation on the page?

    Reply ↓

    • Hi!

      Look here:
      http://karinebosch.wordpress.com/sharepoint-controls/sharepoint-validation-controls/

      There are SharePoint Validations Controls… – You can use jQuery but you need to use the IDs of the controls *after* rendering. Neither “FieldID” nor “ID” of the Control. In some situaltions I use http://bassistance.de/jquery-plugins/jquery-plugin-validation/

      Regards
      Ingo

      Reply ↓

26. Thanks for the article – I was able to create my custom form and it works great!
    However I have one issue – my field descriptions do not show on the form i is this because I am using ControlMode=Edit???
    Would be really useful to have the descriptions so if you are able to shed some light on what may be the problem I would be greatfull.
    thanks!

    Reply ↓

    • In case you need to look at the markup:

      :

      <SharePoint:EncodedLiteral ID="EncodedLiteral1" runat="server" text="” EncodeMethod=”HtmlEncode”/>

      <SharePoint:EncodedLiteral ID="EncodedLiteral2" runat="server" text="” EncodeMethod=”HtmlEncode”/>

      <SharePoint:SPLinkButton id="idNavLinkViewAll" runat="server" NavigateUrl="~site/_layouts/viewlsts.aspx" Text="” accesskey=””/>

      <SharePoint:SPLinkButton runat="server" NavigateUrl="~site/_layouts/viewlsts.aspx" id="idNavLinkSiteHierarchy" Text="” accesskey=””/>

      <SharePoint:SPLinkButton runat="server" NavigateUrl="~site/_layouts/viewlsts.aspx" id="idNavLinkSiteHierarchyV4" Text="” accesskey=”” CssClass=”s4-qlheader” />

      <SharePoint:SPLinkButton runat="server" NavigateUrl="~site/_layouts/recyclebin.aspx" id="v3idNavLinkRecycleBin" ImageUrl="/_layouts/images/recycbin.gif" Text="” PermissionsString=”DeleteListItems” />

      <SharePoint:ClusteredSPLinkButton
      runat="server"
      NavigateUrl="~site/_layouts/recyclebin.aspx"
      ImageClass="s4-specialNavIcon"
      ImageUrl="/_layouts/images/fgimg.png"
      ImageWidth=16
      ImageHeight=16
      OffsetX=0
      OffsetY=428
      id="idNavLinkRecycleBin"
      Text="”
      CssClass=”s4-rcycl”
      PermissionsString=”DeleteListItems” />

      <SharePoint:ClusteredSPLinkButton
      id="idNavLinkViewAllV4"
      runat="server"
      PermissionsString="ViewFormPages"
      NavigateUrl="~site/_layouts/viewlsts.aspx"
      ImageClass="s4-specialNavIcon"
      ImageUrl="/_layouts/images/fgimg.png"
      ImageWidth=16
      ImageHeight=16
      OffsetX=0
      OffsetY=0
      Text="”
      accesskey=””/>

      Document Description

      Discipline

      Topic

      Publication Type

      Document Source

      Tag

      Fiscal Year

      Document Language

      Rating

      Country

      Document Tags

      var elm = document.getElementById("idAttachmentsTable");
      if (elm == null || elm.rows.length == 0)
      document.getElementById("idAttachmentsRow").style.display='none';

       

      if (document.getElementById(“onetidPageTitleAreaFrame”) != null) {
      document.getElementById(“onetidPageTitleAreaFrame”).className = “ms-areaseparator”;
      }

      .ms-bodyareaframe {
      padding: 8px;
      border: none;
      }

      Reply ↓

      • Yikes, that didnt turn out welll at all! :O

        Reply ↓

27. its very good Example.. But, i have to add a Tag/Label/Textbox in upload.aspx page of Sharepoint Document Library which is created as List Defination. how can i achive this…

    Reply ↓

28. I have created a form structure and I have kept the tag empty but at runtime the fields are again added in the form. Please help.

    Reply ↓

29. Hi, its a very informative post. Thanks for walking through step by step.
    I am having trouble to configure the custom form for document library with multiple content types attached. Using SharePoint:ChangeContentType control shows renders the dropdown but nothing happens on selecting a different content type. How to fix this?

    Reply ↓

30. Hi, your example is very nice and worked for me, but I have one problem: in the EditForm, the Save and Cancel button in the Ribbon are doing nothing. Do you perhaps have any idea onto this issue?

    Reply ↓

    • Hi again, solved it. I had set the original webpartzone on visible=false. Now the button wants to work with this form but cannot. You need to use display:none instead.

      Reply ↓

31. Awesome tutorial dude. very helpfull

    Reply ↓

32. I have used your method for deploying my custom form and its great. Thanks….But i want to use the fields in my new.aspx.cs form because i want to display the choices of dropdown dynamically depending on the user logon…Please suggest how can i do it…????

    Reply ↓

    • short answer: add your own html dropdown. fill it on GET in code with the users values. write the selected value to the field on postback in your code. remove the sharepoint field from the aspx. this should do. 🙂

      Reply ↓

      • Can i use Event receiver to fire an event on Add or Edit form Action to change the values of field on a display form……..Is there some event for it

        Reply ↓

33. Hello all,

    Nice article! It’s been a lifesaver. I’ve been using the technique a lot recently.

    However, I find myself in a bit of a quandry: I would like to prefill the fields of one of my forms with information I obtain from another ListItem. In a nutshell, I have a custom action that should pull information from a parent list item and copy basic information into this new list item so that the user doesn’t have to fill them in manually, and yet these are information that can potentially change from the first list item to the second.

    I was hoping to do this during the Page_Load event of the form – obtaining the current list item is easy, but calling the Update() method of the item causes an error (Updates called during Get are disabled) – which makes sense I suppose.

    I’ve thought of setting the values using jQuery, which isn’t too hard until you get to multi-value lookups. However — does anyone have any experience with a more elegant way of doing this? It feels a bit… Janky.

    Any suggestions welcome!

    Cheers,
    Rick.

    Reply ↓

34. Hi Guys, I am new to sharepoint development and I need help in similar note. I have a custom requirement, for example in the new list item form using Visual Studio 2010 for Sharepoint 2010 – I need to have text box search field, based on the search criteria, upon Search button click, I have to go to sql database and bring the matching record(s)(Name(text), EmployeeId(Value)) and show them in a drop down list. Upon one employee selection from the drop down list again I need to go the database(or I can grab everything in first trip and have it available) and grab the other fields like (badge number, supervisior, current department, and so on) and pre-populate the these other fields in the form. Then other remaining feilds are filled by user(HR) like department they are transffering to and so on, upon Save the item will be inserted in the list. I believe the list table will be created automatically upon custom list form design which is developed in share point project through visual studio 2010 or will I have to do anything to create this table in sharepoint database. Any help on this be greatly appreciated. Thanks very much in advance.

    Reply ↓

35. I am trying to create a custom form that will push data to multiple lists. Please let me know if this is possible with this approach.

    Reply ↓

36. Thanks for the great post. I’m trying to do something like this but with code-behind to handle special business logic. If I use can I still reference the fields in code behind? Or is SharePoint going to use it’s own code for the controls anyway?

    Reply ↓

37. Hi,
    Thank you for sharing this article. But, what about read only field ? In sharepoint designer we can do
    But, this doesn’t work using this method. Help me please

    Reply ↓

This site uses Akismet to reduce spam. Learn how your comment data is processed.